=================================================
    Welcome to ViewIt08C software
=================================================

=================================================
 Contents
=================================================

    1.0 ViewIt08C Overview
    2.0 Minimal PC Configuration Requirements
    3.0 Installation

=================================================
 1.0 ViewIt08C Overview
=================================================

    The ViewIt08C software is intended for operating the IT-08 Series of TV Signal Analyzers with multicolor display (IT-081, IT-087, IT-088, and IT-089). This software allows you to:
  measure the parameters of analog and digital (DVB-C, DVB-T and DVB-T2, depending on the Analyzer type) channels in the similar way they are measured by the Analyzer;
  measure the spectrum within an arbitrary frequency range;
  create and view the data logger pages;
  create and edit the channel plans;
  create and edit the limit plans;
  view the channel template of the Analyzer;
  save and print out the measurement reports;
  update the Analyzer firmware.

=================================================
 2.0  Minimal PC Configuration Requirements
=================================================

  Microsoft Windows XP, Microsoft Windows Vista, Microsoft Windows 7, Microsoft Windows 8 operating systems 
(32-bit or 64-bit versions);
  30 Mb of hard drive space available;
  SVGA computer monitor and video card supporting 256 colors and resolution of 1024x768 pixels;
  free USB 2.0 port.

=================================================
 3.0 Installation
=================================================

    To install the ViewIt08C software, run the Install_ViewIt08C_vX.X.X.exe file under administrator's rights (where X.X.X is the software version). 
    Select the required language in the installation wizard and view the information about the software. In case you install this software for the first time, follow the installation wizard instructions and select the destination folder for the program. Otherwise, if you would like to update the previously installed software, confirm the updating. Wait until the installation process is completed.
    After the installation is finished, the wizard will offer to install the USB driver for operating the Analyzer (only for 32-bit versions of operating systems). If the driver was not previously installed, we recommend confirming its installation. Follow the wizard instructions; wait until the installation process is completed.
    If you experience any problems during the software installation, please send your problem description via 
e-mail: welcome@planar.chel.ru.

=================================================
Document date: December 03, 2013
=================================================